CALL FOR A QUOTE
Quick Start
Reglazing your bathtub can provide your bathroom with a fresh and updated look. Our quick and easy process provides a whole new appearance at a fraction of the cost.
Bathtub & Tile Refinishing
Professional-grade coating designed to restore bathtubs, showers, sinks, tiles, and fiberglass surfaces. Indoor use only.
Quick Start Guide
Step 1 - SURFACE PREPARATION
-
Wear gloves. Avoid contact with eyes, skin, and clothes.
-
Spread Etch & Cleaner Combo over the surface.
-
Wait 10–15 minutes, then scrub with water and a Scuff pad.
-
Rinse thoroughly with cool water.
-
Dry completely before applying topcoat.
Step 2 - Primer
-
Apply the primer in small sections using a primer wipe.
-
Ensure 100% coverage.
-
Let dry and apply topcoat within 30 minutes.
Step 3 - mixing
-
Add Part A Refinishing Paint & Part B Hardener into Mixing container
-
Mix for 3 minutes until fully blended
Step 4 - APPLICATION
-
Apply in smooth, even strokes using a foam roller.
-
Roll lightly — don’t press hard
If Bubbles Appear While Wet
-
Lightly pass the foam roller once over the area
-
Do NOT press hard & Do NOT keep rolling
Coating is designed to self-level
This kit is designed for full coverage in a single coat.
RECOATING: If a second coat is desired, wait 1–2 hours
before applying.
DRYING
Dust-free: 1–2 hrs, Light use: 24 hrs, Full cure: 48 hrs.
Safety Data Sheet (SDS)
SAFETY INSTRUCTIONS & WARNINGS
Use ventilation. Wear respirator, gloves, and eye protection. Keep away from flames and sparks. Avoid inhalation and skin/eye contact. Keep away from children.
PAINT contents: Acrylic resin, solvents, pigments, and performance additives, and curing agents.
FIRST AID: Skin: Wash with soap & water.
Eyes: Rinse 15 min with water. Get help.
Inhaled: Get fresh air now. Call help if dizzy/breathing issues.
Swallowed: Rinse mouth. DO NOT induce vomiting. Get emergency medical treatment immediately.
Hazard Identification
GHS Classification:
-
Flammable Liquid
-
Skin Irritation
-
Eye Irritation
-
Skin Sensitization
Signal Word: WARNING
Hazard Statements:
-
Flammable liquid and vapor
-
May cause skin and eye irritation
-
May cause allergic skin reaction
Precautionary Statements:
-
Use in a well-ventilated area
-
Avoid breathing vapors or mist
-
Wear protective gloves and eye protection
-
Keep away from heat, sparks, and open flames
Composition / Information on Ingredients
Chemical Nature: Acrylic-based coating with solvents and curing additives.
Specific chemical identities and concentrations are withheld as trade secrets.
Accidental Release Measures
-
Ventilate the area
-
Remove ignition sources
-
Absorb with inert material and dispose according to regulations
Physical and Chemical Properties
-
Appearance: Liquid coating
-
Odor: Solvent-like
-
Flash Point: Flammable
-
Solubility: Partially soluble in water
Stability and Reactivity
-
Stable under normal conditions
-
Avoid heat, sparks, and open flame
-
No hazardous polymerization expected
Toxicological Information
-
May cause skin and eye irritation
-
May cause allergic skin reaction with repeated exposure
Other Information
This Safety Data Sheet is provided for consumer and retail
compliance
purposes.
Full chemical disclosure is available upon request.
